The Honeywell C7061A1012 is a legacy dynamic self-check ultraviolet flame detector for continuous flame supervision on industrial gas- and oil-fired burners. Its oscillating shutter periodically checks the UV sensing path during operation, and the detector must be used with a compatible Honeywell dynamic self-check flame amplifier. Product availability and the suitability of C7061A1053 as a replacement must be verified before quotation.
كاشف Honeywell C7061A1012 هو كاشف لهب قديم بالأشعة فوق البنفسجية مزود بفحص ذاتي ديناميكي، ومخصص للمراقبة المستمرة للهب في الشعلات الصناعية العاملة بالغاز أو الزيت. يقوم المصراع المتذبذب بفحص مسار الاستشعار دورياً أثناء التشغيل، ويجب استخدام الكاشف مع مضخم فحص ذاتي متوافق من Honeywell. يجب التحقق من التوفر ومن ملاءمة C7061A1053 كبديل قبل تقديم عرض السعر.
The Honeywell C7061A1012 is a legacy model from the C7061A Dynamic Self-Check Ultraviolet Flame Detector family. It detects ultraviolet radiation produced by gas, oil and other carbon-based flames and transmits the flame signal to a compatible Honeywell flame amplifier and burner safeguard control.
An oscillating shutter interrupts the optical path approximately 12 times per minute, allowing the UV sensing tube and associated self-check circuit to be monitored during burner operation. The standard C7061A housing is violet cast aluminum, meets NEMA 4 requirements and incorporates a protective heat block. The UV sensing tube, quartz viewing window, coil and shutter assembly are serviceable components.
For a legacy C7061A1012 quotation, confirm the nameplate voltage and frequency, mounting thread, lead-wire arrangement, compatible R7861A amplifier, burner controller, certifications and installation environment. The model is discontinued. C7061A1053 is commonly identified as a potential replacement, but electrical, mechanical and approval compatibility must be verified before substitution.